|
Craft Courses / Tuition - see bottom of
page (free advertising)
For craft projects, ideas and templates
please click here
 Introduction
There
are endless possibilities for the design and decoration of ceramic
objects. Experiment with the wide range of methods, materials and colours
available to transform everyday objects into designer ceramics. Add an
individual touch to a piece of pottery or use manufactured ‘blanks’;
These can be bought directly from pottery suppliers.
Origins
In the 19th and 20th centuries many
ceramic artists rose to prominence and the interest in decoration spread.
This enthusiasm came from England through the influence of John Ruskin and
William Morris and their reaction against Industrialisation. Pablo Picasso
turned to decorating ceramic forms that he made himself and a great deal
of interest grew as a result of his creations. Modern decorative ceramics
are still greatly influenced by these early innovators.
 Basic techniques
The decoration of ceramics is the application of a design to
a ceramic object that has already been glaze fired.
There are three main techniques in this process that are
commonly used by today’s decorative artists; enamel firing, transfer
firing, lusterware and precious metal application.
All of these processes require the application of a design
and a kiln firing up to temperatures of 830°F. The design is applied to
the smooth glazed surface of a pot that has been hardened in a previous
firing. During the decoration firing the enamels, transfers, lustres or
metals become part of the surface of the pot and become permanent.
A smooth, unpitted glaze is the best surface to begin
practise on. Perfect for use are ceramic tiles or china ‘blanks’.
This is the term to describe an earthenware or porcelain pot
that is covered with a plain white glaze. These are available from pottery
suppliers or production potteries as ‘firsts’ or ‘seconds’. The
latter have small faults which are not often very noticeable and can be
used to practise on. In most cases they can also be used as a medium for a
final design.
Kilns
A kiln is essential for a ceramic artist and there are a
number of types and sizes available to suit individual needs.
Small, enamelling or test kilns are sold for firing enamels
onto metals for jewellery but these are also adequate for firing samples
or small ceramic pieces. Kiln size will limit what you can achieve.
Recent developments in kiln technology have produced
lightweight, efficient ceramic fibre electric kilns that are ideal for the
ceramic artist. They can be wired into a cooker point on a 30amp fuse and
used I a space where there is adequate ventilation. This is important
because the vapours produced by the enamel, transfer and metal firings can
be quite overpowering.
It is also necessary to have a range of kiln furniture to
load your work into the kiln. Shelves divide the depth of the kiln and
these are seperated by props.
Blanks are usually glazed all over and if they are not
seperated from each other and the kiln shelves, they will stick because
the glaze softens. Stilts, spurs and saddles are the small ceramic
carriers that are used to prevent this happening.
Enamels
Enamel paints are sold in various forms; as a powder, in
ready to apply liquid form and as pastilles. It is even possible to buy
them in the form of felt or fibre tipped pens, which are fu to use.
You can prepare your own paints for application by mixing the
powder with a solvent and grinding it between a glass palette and glass
surface. Turpentine is the usual solvent for these enamels and essential
oils such as aspic or clove oil can also be added to prevent hem from
drying too slowly.
The paints can be blended or superimposed according to style
and taste. They are applied with a brush, pen or palette knife but thinner
application creates a smoother finish and if the application is too thick
this can lead to bubbling or blistering during the firing. There is a wide
range of colours available but some are quite expensive because of the
ingredients. Colouring agents are oxides of metals which increase in
brilliance during firing. The oxide chromium, for example, produces green
and cobalt blue.
Ceramic Transfers
A very popular technique for ceramic decoration is the use of
ceramic transfers. These are enamel paints screen printed onto paper in a
transparent waxy medium. The paper can be cut into shapes and designs and
when the paper is immersed in water the transfer falls away from its
carrier and it can then be gently sponged onto the tile or pot. It is very
important to ensure all air bubbles are removed as they will cause the
transfer to blister during the firing process.
The transfers are sold in a variety of colours and you can
have photographs, drawings or designs specially screen printed for
decoration this way.
This is the technique used to make commemorative plates and
mass produced items of pottery such as mugs. However, transfers can be
adapted to make very interesting ‘one-off’ designs by an individual
ceramic artist.
Lustre and metals
Lustres and precious metals are not easy to use; they are
expensive and as such should be tried only after reasonable skill has been
achieved with enamel decoration. Lustres are metals in a resin solution.
After the firing the area decorated has a thin film of metal over it,
giving a beautiful decorative effect.
Courses
If you offer ceramic painting courses / evening classes /
demonstrations - please contact us to advertise your details
here.
There are lots of books available to learn the skills from
home.
To learn proper ceramic painting techniques the best starting
point is to contact polytechnics / colleges to see if they have any
organized courses.
Alternatively,
contact a large pottery makers / manufacturers to ask if they offer
tuition.
back
to top
back to
craft topics
To
add to this page please contact us - to link to this page please copy
and paste the url from the address bar.
Why not visit our craft forum to
gain tips, advice and chat to fellow crafters, click
here
Attention Craft
Workers!
We want to hear all
about your craft, the history and skill involved to make your craft
from start to finish. Photos of you at work would be great and step by
step instructions would be helpful. Any advice that you could give
people wishing to start up in the craft business. And if any courses,
training, talks, etc that you offer. |
Crafts
Crafts
Crafts
Crafts
Crafts
.Painting
Ceramics
Craft Topics
